Ballycatter.com. Portal - Find Equipment and Service Providers

Sign in

Welcome back

For advertising on

0
0
    ×
  • All Categories
  • Construction
  • Marine
  • Subsea
  • Process Equipment
  • Transport
  • Workover
  • Completions
  • Drilling
7 results of over 10,000 items

Completions

Tubing

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Tubing Hanger 2 3/8

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required. View Details

7 inch Tubing Hanger

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required. View Details

Tubing hanger with electrical feedthrough for ESP applications

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility. View Details

OCTG Tubing from 2 3/8 inch to 7 inch for oil and gas well completions

OCTG (Oil Country Tubular Goods) refers to the piping products that are used in oil and gas production and drilling activities. OCTG pipe normally is manufactured based on API specifications. Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application. Tubing is the pipe placed in the well that is exposed to flowing fluids from the reservoir to surface. It is uncemented and able to pulled and replaced in the event the pipe erodes or corrodes. Our international network of manufacturers and warehouses have almost all weights and grades in stock. View Details

Wireline Entry Guide

A wireline entry guide is a device that is used to guide a wireline into a wellbore or oil and gas well. It is used to direct the wireline into the wellbore in a controlled manner. View Details

2 3/8" L80 Yellowband Tubing Hydril 533"

This connection is fully interchangeable with: Wedge 503® - 2.375 in. - 0.19 (4.70) in. (lb/ft) Wedge 533® - 2.375 in. - 0.218 (5.30) / 0.254 (5.95) / 0.295 (6.60) / 0.336 (7.45) in. (lb/ft) Wedge 563® - 2.375 in. - 0.19 (4.60) / 0.218 (5.10) / 0.254 (5.80) / 0.295 (6.60) / 0.336 (7.35) in. (lb/ft) View Details

Tubing Hanger – 4 1/2" – 5,000 / 10,000 PSI

The 4 1/2" Tubing Hanger forms part of the primary well barrier, landing in an 11" casing to hold the tubing string in place and provide pressure sealing for 5,000 or 10,000 PSI.

Standard Information for 4 1/2" Tubing Hanger:

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of the tubing (or pup-joints as required for space out) and is landed in the casing flange in either compression or tension, depending on the wellhead assembly. Elastomeric seals prevent communication between the tubing and the A‑annulus, maintaining well integrity.

The 4 1/2" Tubing Hanger suspends 4 1/2" production tubing and provides a pressure seal between the tubing and the annulus. It is installed in an 11" casing flange, forming a secure interface with the wellhead system.

The hanger is used with tubing hanger spools and couplings, allowing integration into the wellhead assembly. It has a pressure rating of 5,000 to 10,000 PSI and meets API 6A standards for materials, design, and pressure containment.

Ports can be included for hydraulic or chemical control lines to connect downhole safety valves or injection systems if required. The hanger supports the tubing string mechanically while maintaining sealing and pressure containment at the wellhead.

 View Details