Ballycatter.com - Industrial Equipment

FRN Wireline Retrievable 5.5 inch Subsurface Safety Valve

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Tubing Inspection

Ensuring Production Integrity with InWaTec Combined's E-Line Tubing Inspection Services In the lifecycle of oil and gas wells, tubing integrity is fundamental to ensuring consistent production and operational safety. At InWaTec Combined, we offer specialized E-Line Tubing Inspection Services to preemptively identify and mitigate risks associated with tubing failure, utilizing state-of-the-art diagnostic techniques to safeguard your assets. Tubing failures, which can stem from deformation, physical wear, or corrosion, pose a significant threat to well integrity and production. Our advanced inspection services are designed to detect these issues early, enabling timely interventions that maintain continuous well performance. Our comprehensive suite of E-Line Tubing Inspection Services includes: Cased-Hole Calipers: These tools provide precise measurements of the internal diameter of tubing, detecting anomalies and changes that could indicate deformation or wear. Flux-Leakage Tools: Specialized for identifying defects in ferrous tubulars, these tools locate areas of metal loss or corrosion by detecting disruptions in magnetic flux. Electromagnetic Phase-Shift Tools: By measuring the changes in electromagnetic fields, these tools can effectively pinpoint areas of wall thickness changes due to corrosion or wear. Ultrasonic Tools: Employing high-frequency sound waves, these tools are adept at measuring tubing wall thickness, identifying areas at risk of thinning, which could lead to potential collapse. In addition to these, our E-Line Tubing Inspection Services also employ ultrasonic radial-cement-evaluation and modified openhole-imaging devices, which are particularly effective in assessing the condition of the tubing for signs of internal or external metal loss—a crucial step in preventing unexpected well shut-ins. At InWaTec Combined, we understand that the stakes are high when it comes to maintaining well integrity. Our E-Line Tubing Inspection Services are not just about identifying problems; they're about delivering peace of mind. By utilizing our advanced diagnostic tools, operators can rest assured that the integrity of their production tubing is being monitored with the utmost precision, allowing them to focus on maximizing output and efficiency. Choosing InWaTec Combined means partnering with a company that places a premium on innovation, safety, and reliability. Our commitment to excellence ensures that your operations benefit from the latest in inspection technology, delivered by a team of seasoned professionals. Trust us to provide the insights you need to keep your wells flowing safely and smoothly, today and into the future. View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

24 inch Well Servicing Pipe Wrenches for torquing tubulars and downhole tools

The adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work. When torquing with a pipe wrench remember the tool push phrase - 24 tight and 48 loose! View Details

Tube Fittings Male Connector ISO Parallel Thread – 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1" – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Tube Fittings Male Connector with ISO Parallel Thread is designed to join tubing to parallel-threaded ports in high-pressure systems. This fitting ensures a tight, leak-resistant seal that maintains system integrity under pressures up to 6000 PSI, making it suitable for demanding oil and gas applications.

Constructed from high-quality materials, the fitting is manufactured to precise tolerances to ensure proper ferrule deformation and consistent performance. The parallel thread design allows for a straightforward installation and secure connection without excessive torque, reducing the risk of thread damage or galling.

These fittings are used extensively in pipelines, instrumentation, and process systems where a reliable and durable connection is required. The male connector configuration allows it to mate with female threaded components, providing versatility in system design. The robust design also ensures excellent performance under vibration, temperature changes, and fluctuating pressures.

Overall, this fitting combines technical reliability with ease of use, making it suitable for both engineering and operational personnel who require dependable tubing connections in oil and gas environments.

View Details

Hydrostatic Bailers

InWaTec Combined: Enhancing Wellbore Clarity with Advanced Hydrostatic Bailer Services In the diverse and demanding world of well servicing, maintaining a clear and functional wellbore is essential for the efficient operation of drilling rigs, workover operations, and production wells. InWaTec Combined stands at the forefront of this vital service with our Hydrostatic Bailer running services, offering a sophisticated solution to the age-old challenge of collecting solids and cleaning the wellbore. The Necessity of Hydrostatic Bailer Operations Hydrostatic Bailers are an integral component in the suite of tools required for effective well maintenance. The principle behind these tools is simple yet ingenious—they utilize the pressure differential created by the well fluid to draw debris into the bailer, effectively removing it from the wellbore. This operation is crucial, as it ensures that the wellbore is free from obstructions that could hinder subsequent interventions or impede production. Versatile Solutions for Onshore and Offshore Operations Whether dealing with onshore wells nestled in the heart of a bustling oil field or offshore platforms braving the open seas, InWaTec Combined’s Hydrostatic Bailer services are designed to adapt to any environment. Our tools and techniques are as versatile as they are effective, ensuring that no matter the location, the cleanliness and functionality of the wellbore can be maintained to the highest standards. Technology-Driven Efficiency InWaTec Combined’s commitment to technological innovation is embodied in our Hydrostatic Bailer services. By employing the latest advancements in well servicing technology, we provide a more efficient and reliable means of wellbore cleaning. This not only optimizes the bailing process but also translates into significant time and cost savings for our clients. Prioritizing Safety and Environmental Stewardship Safety and environmental protection are paramount in all of InWaTec Combined’s operations. Our Hydrostatic Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of responsible operations, especially in sensitive onshore and offshore locations. Your Partner in Operational Excellence Choosing InWaTec Combined for your Hydrostatic Bailer needs means partnering with a company that is dedicated to excellence. Our Hydrostatic Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Clarity in Every Operation In conclusion, InWaTec Combined’s Hydrostatic Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, efficiency, safety, and environmental responsibility, we ensure that your wellbore cleaning operations are performed to the highest standards. Trust InWaTec Combined to deliver clear solutions for your wellbore challenges, ensuring the uninterrupted success and productivity of your operations. View Details

7 5/8" HP-5 Hydraulic Set Production Packer

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Hydraulic cylinder for various industrial applications

A hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end/head-end). View Details

7" Mech-1 Single Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Fiber Network Backbone Installation

Illuminating the Pathway to Enhanced Connectivity with Nulux: Pioneering Fiber Network Backbone Installation for the Oil & Gas Sector In the intricate labyrinth of the energy sector, wherein seamless data transmission forms the spinal cord of operational efficacy, establishing a robust, secure, and unfettered network backbone becomes imperative. At Nulux Network Solutions, our objective transcends beyond offering mere solutions; we are your partners in navigating through the convoluted pathways of data connectivity and communication within the oil and gas industry, ensuring that the artery of your operations pulsates with vigor, reliability, and sustainability. Sustaining the Future with Fiber Optics Nulux emerges as a beacon of sustainable advancements, offering an array of products, solutions, and services that cascade across the entirety of the energy value chain. We are steadfast in our commitment to guiding our partners in the oil and gas industry towards a future that not only resonates with sustainability but is also interwoven with technological prowess and innovation. Our Fiber Optic solutions symbolize this commitment, ensuring your journey towards a more sustainable future is always illuminated by the consistent, reliable, and efficient transmission of data. The Nulux Fiber Network Backbone Installation The oil and gas industry, characterized by its voluminous data generation, necessitates a network backbone that can shoulder the hefty demands of data transmission with unbridled efficiency and security. Our Fiber Network Backbone Installation service is not merely a technological provision but an embodiment of our expertise, experience, and dedication to ensuring your operations are always in sync with the digital pulse of the industry. Reliable Data Transmission: An uninterrupted flow of operational data is ensured, empowering your operations with real-time analytics, diagnostics, and vital decision-driving data. Fortified Security: Guarding your data against potential breaches and vulnerabilities with a fiber network that is securely fortified, ensuring a safe and secure environment for your data to traverse. Scalability: Our fiber network infrastructure scales in tandem with your operational expanse, ensuring that as your data demands burgeon, our network is always a step ahead in meeting those requirements with equal efficiency and reliability. A Tapestry of Operational Excellence Our Fiber Network Backbone Installation forms the intricate tapestry that interlaces your operational nodes, ensuring that the voluminous data generated is seamlessly integrated, conveyed, and utilized, forming the substrate upon which vital operational strategies and decisions are cultivated and realized. Safeguarding Your Data, Ensuring Its Journey is Unhindered At Nulux, we ensure that the conduit through which your data traverses is not merely operationally optimized but also securely shielded against potential cyber threats and vulnerabilities, fortifying your operational data against breaches and ensuring it navigates through a secure pathway. Join Hands with Nulux Embark on a journey where your operational data is not merely transmitted but is safeguarded, scrutinized, and utilized to shape a future wherein your operations echo with sustainability, operational excellence, and technological advancement. With our Fiber Network Backbone Installation, steer through the digital realms of the oil and gas industry with Nulux, where every bit of data, every decision, and every operational stride is backed by the stalwart reliability and security of our fiber-optic solutions. In a realm where data propels decisions, ensuring its secure, efficient, and unfettered transmission is paramount. Traverse with Nulux, where your data is not merely communicated but empowers your operations towards a future where every decision is data-driven, every operation is efficient, and your journey towards sustainability is continually illuminated by the steadfast glow of our solutions. Your journey towards an operationally efficient and sustainable future begins with Nulux. Let’s navigate through the digital corridors of the oil and gas industry together, ensuring your data navigates through the most secure, reliable, and efficient pathways, crafting a future where technology and sustainability converge to form a symphony of operational excellence. Let’s craft this future, together, with Nulux. View Details

CSA 60 unit, non-Locking, FAST charger rack

Boost Your Equipment’s Readiness with the CSA 60 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to introduce the CSA 60 Unit Non-Locking FAST Charger Rack (model NWI-NWCR-60BC-SSI), a high-capacity, single-sided charging solution designed for the fast-paced needs of modern mining and industrial operations. This charger rack is engineered to keep your Wisdom lighting equipment fully charged and ready for any task. Rapid Charging for Maximum Efficiency The CSA charger rack is optimized for the WISE LITE2, LAMP3A, and 4A models, offering an impressive charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This quick turnaround is essential for minimizing downtime and ensuring your team's equipment is always operational. High-Capacity Charging Solution With the ability to charge up to 60 units simultaneously, this charger rack is perfect for large-scale operations. Its single-sided design is space-efficient, making it an ideal fit for equipment rooms, charging stations, or any workspace where space is at a premium. Designed for Convenience and Accessibility The non-locking feature of the CSA 60 Unit Charger Rack provides easy and quick access to all charging ports, facilitating efficient management of multiple devices. This accessibility is particularly beneficial in fast-paced work environments where time is critical. Durable and Reliable Construction Built to withstand the demanding conditions of mining and industrial environments, the CSA charger rack is both durable and reliable. Its sturdy construction ensures long-lasting performance, making it a valuable investment for any operation. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and rental equipment providers who need to charge a large number of devices efficiently and reliably. Its high capacity and fast charging capabilities make it an indispensable tool for large teams. Elevate Your Charging Capabilities Today The Wisdom CSA 60 Unit Non-Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to discover more about this efficient and practical charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions. View Details

ESP Disassembly Bench

Are you in need of a high-quality disassembly bench for the teardown and inspection of electric submersible pumps? Look no further than Sivam! We're proud to offer a range of disassembly benches that are specifically designed for the inspection and maintenance of ESP's. Our benches are built from the highest quality materials and are engineered to provide exceptional durability and reliability, ensuring that your team can work safely and efficiently. At Sivam, we understand the importance of precision and accuracy when it comes to maintaining critical equipment like ESP's. That's why our disassembly benches are designed to provide a stable and secure platform for teardown and inspection, with features like adjustable height for a level working surface to ensure maximum convenience and ease of use. But that's not all - our disassembly benches also come equipped with a range of additional features to help your team work more efficiently. From built-in cages to customizable work surfaces, our benches are designed with your team's needs in mind. At Sivam, we're committed to providing our customers with the highest level of quality and customer service. That's why we work closely with our clients to understand their specific needs and design benches that meet their exact specifications. So if you're in need of a high-quality disassembly bench for the inspection and maintenance of ESP's, choose Sivam. Contact us today to learn more about our products and services and to find out how we can help take your operations to the next level! View Details

ET-30 Single Stage Steam Turbine

Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

NWB-30 Charger

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30. View Details

Bearings of various types

Bearings are "parts that assist objects' rotation". They support the shaft that rotates inside the machinery. Machines that use bearings include automobiles, airplanes, electric generators and so on. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

HP-3 Hydraulic Set High Angle 9 5/8" Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Oil Only Absorbent Pad

Quick Absorbent Pads stand as a reliable and efficient solution for liquid cleanup, offering a combination of rapid absorption, fine-fiber construction, oil-specific capabilities, durability, and enhanced visibility. Upgrade your cleanup processes with a product designed to keep surfaces dry and operations running. Choosing the right solution for your needs is crucial, and our Quick Absorbent Pads offer several advantages that set them apart from other options. Why should you use the absorbent pads? Absorbent pads are specifically designed for rapid absorption of leaks, spills, and overspray. The quick response time is crucial in preventing the spread of liquids and minimizing potential hazards. If time efficiency is a priority, our absorbent pads are a superior choice. Unlike some general-purpose absorbents, our pads are engineered for the selective absorption of oils and oil-based liquids. This targeted approach ensures maximum effectiveness in scenarios where oil contamination is a primary concern. If your application involves oil cleanup, our pads offer a specialized solution. The fine-fiber construction of our absorbent pads ensures a clean and residue-free surface after cleanup. This is a significant advantage over some absorbents that may leave behind liquid or fiber remnants. If you value a thorough and residue-free cleanup, our absorbent pads are the ideal choice. absorbent pads feature a durable multi-layer polypropylene fiber structure, making them tough and resistant to tearing. This robust construction ensures longevity and reliability, even in demanding industrial environments. If durability and tear resistance are priorities, our absorbent pads excel in these aspects. The oil-specific absorption feature of our pads means they do not absorb water. This specificity is crucial in scenarios where water contamination is not desired. If you require an absorbent that selectively targets oils without absorbing water, our pads provide a distinct advantage. The bright white color of our absorbent pads enhances visibility during cleanup operations. This makes it easier to monitor the saturation level and determine when replacement is needed. If visibility and ease of use are important considerations, our pads offer a practical solution. Quick Absorbent Pads are versatile and suitable for a wide range of industries and applications. Whether you're in manufacturing, automotive, or any other sector with liquid spill concerns, our pads offer a reliable and efficient solution. In short: Oil Only Absorbent Pad - Absorbs up to 0.3 L (0.07 gal), absorbs rapidly, selective absorption of oils and oil-based liquids with maximum effectiveness, No residue or fiber left behind, the absorbent pad has durable multi-layer construction, oil-selective without absorbing water, bright white color for visibility, versatility across industries. Technical Specs Part Number: OH-P811 Product Type: Absorbent Pad Fluids Absorbed: Oil Based Liquids Volume Absorbed per unit: 17.5 oz Colour/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per pkg.: 5.2 liter Floating: Yes UV Resistant: No Size: 8” x 11.5” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes View Details

Bridge Plug Setting

Seamless Zone Isolation: InWaTec Combined’s E-line Bridge Plug Setting Services In the complex operations of oil and gas extraction, the ability to isolate zones within the wellbore is critical for effective production management and intervention. InWaTec Combined offers specialized E-line Bridge Plug Setting Services, utilizing state-of-the-art tools to achieve precise zonal isolation with both permanent and retrievable bridge plug options. Bridge plugs are essential elements in completion hardware, designed to provide robust seals both above and below the production tubing within the casing, liner, or wellbore wall. Their primary function is to isolate certain sections of the well, which is especially beneficial in wells with multiple producing zones or when specific zones need to be temporarily sealed off during interventions. Permanent Bridge Plugs: These are typically favored for their cost-effectiveness and superior sealing and gripping capabilities. Once set, they provide a dependable barrier, with metal slips or "slips" that anchor into the casing's inner diameter using sharpened, carburized teeth. The seal is completed with large cylindrical rubber elements, and in high-pressure environments, metal rings enhance the seal by preventing rubber extrusion. Retrievable Bridge Plugs: These plugs are the go-to solution when flexibility is required, such as during secondary recovery operations, well re-completions, or when there's a need to change out production tubing. Though they may have lower sealing and gripping capabilities compared to permanent options, their design allows for removal and reuse, providing significant operational versatility. Our E-line Bridge Plug Setting Services deploy these tools with precision. The plug is conveyed into the well via wireline—a method that provides real-time depth control and selectivity. Once at the target depth, an axial load is applied to the bridge plug to initiate the expansion of the slips and rubber elements, creating a secure seal against the casing. The setting mechanism can be activated hydraulically, mechanically, or with a controlled chemical charge, depending on the well conditions and client requirements. InWaTec Combined’s expertise ensures that the most appropriate setting method is chosen for each operation, considering the well's pressure environment, the desired duration of the plug setting, and the future plans for the well. By opting for InWaTec Combined’s E-line Bridge Plug Setting Services, operators benefit from a service that combines reliability with adaptability. Our commitment to leveraging advanced technologies with expert execution means that your well operations can proceed with confidence, knowing that each zone is isolated with the utmost precision. InWaTec Combined is dedicated to providing solutions that enhance operational efficiency and well integrity. Whether you require a permanent solution for long-term isolation or the flexibility of a retrievable plug for short-term interventions, our E-line Bridge Plug Setting Services are designed to meet your needs with precision, reliability, and cost-effectiveness. View Details

Shear Down Pulling Tools for External Fishing Necks

Optimize Your Downhole Retrieval Operations with HOCA Oil Tools' Shear Down External Fishing Neck Pulling Tools In the intricate world of oilfield operations, ensuring seamless downhole tool retrieval is pivotal for maintaining efficiency and minimizing downtime. HOCA Oil Tools, a specialist in crafting superior downhole slick line tools, proudly presents its Shear Down External Fishing Neck Pulling Tools. These tools are engineered with precision to facilitate the secure and efficient retrieval of subsurface equipment, enhancing operational effectiveness and safety. HOCA’s Shear Down External Fishing Neck Pulling Tools: Precision Engineered for Enhanced Retrieval Our Shear Down External Fishing Neck Pulling Tools are designed for operators who demand reliability and precision in their downhole activities. Built to engage and retrieve subsurface equipment with external fishing necks, these tools are essential for operations requiring the removal of downhole instruments. Equipped with a shear-down mechanism, these pulling tools allow for disengagement in scenarios where the retrieved equipment becomes immovably stuck, thereby ensuring the safety and continuity of operations. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with downhole solutions that meet the demands of modern well operations. Our Shear Down External Fishing Neck Pulling Tools represent our commitment to innovation, quality, and customer satisfaction. Whether you are addressing routine retrieval tasks or facing complex downhole challenges, our tools are designed to enhance the efficiency, safety, and success of your operations. By incorporating our Shear Down External Fishing Neck Pulling Tools into your downhole toolkit, you are choosing a product that delivers on the promise of operational excellence. With HOCA Oil Tools, you gain not just a supplier, but a partner committed to supporting your success with state-of-the-art solutions and expert service. Choose HOCA Oil Tools for your downhole needs and take the first step towards more efficient, safe, and cost-effective retrieval operations. Elevate your downhole performance with HOCA Oil Tools – where innovation, quality, and reliability come together to drive your success. View Details

Shipping Containers for multiple purposes, 20 foot and 40 foot standard or hi-cube

A shipping container is a container with strength suitable to withstand shipment, storage, and handling. Shipping containers range from large reusable steel boxes used for intermodal shipments to the ubiquitous corrugated boxes. The 20ft shipping container is the most popular and widely used container. It’s the smallest of the standard container range and is the most popular choice for intermodal transport, as it’s the easiest to move around. The 40ft high cube container is a taller version of the 40ft container, and is great for moving over-height cargo (up to 2.7m or 8.1ft tall). View Details

HDI Gauge Batteries, Parts, and Repair Kits

HDI Gauge systems used in oil and gas operations are often exposed to harsh environments and continuous use. To maintain accuracy, reduce downtime, and extend the service life of these systems, it is critical to have access to replacement components that are both durable and compatible. A full range of spare parts is available to support maintenance needs, including displays, sensors, cables, processor boards, connectors, and housing elements.

These parts are designed to be interchangeable across compatible models, allowing operators to replace worn or damaged components without requiring full system replacement. This modularity improves cost efficiency and simplifies logistics, especially in remote field locations. Most components are field-replaceable, reducing the need for specialized service technicians and enabling faster return to operation.

Processor boards and display units typically share a common design across multiple gauge models, streamlining inventory requirements and providing flexibility during urgent repairs. Sensors are matched with gauge heads for calibration accuracy but can be easily re-paired and recalibrated in the field or through service support if needed.

Using certified or manufacturer-specified replacement components ensures continued compliance with safety standards, maintains the expected measurement accuracy, and supports the longevity of the equipment. These parts are often backed by service documentation or part tracking for maintenance records and equipment history management.

In short, a well-organized supply of compatible, high-quality parts is essential for effective pressure and temperature gauge system upkeep in demanding industrial settings.

View Details

Scaffolding for onshore and offshore

Finish the job in any and all conditions since this product is weather-resistant and durable so you can enjoy it for many years to come. Each frame is sold separately. Note that the galvanized cross braces and aluminum platforms with plywood are not included. When assembled, this scaffold has a load capacity of up to 4,960 pounds. View Details

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

7" Mech-2 Double Grip Mechanical Set Packer for 26-29 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Safety Valve (Subsurface) 3.63 inch WI

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Ambient Storm Choke Valve 4 1/2 inch

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Rod Pump of various diameters and stroke lengths to optimize oil production

Sucker rod pumping systems are the oldest and most widely used type of artificial lifting system for oil wells. Sucker-rod pumping is the most widely used artificial lift method for onshore oil wells. Sucker-rod strings transfer the motion from the driving machine on the wellhead to the downhole oil pump. Pump diagnoses are generally conducted through an interpretation of the pump dynamometer graph (pump card). View Details

Mobile Energy Solutions

Leading the Way in Mobile Energy Solutions: Cost-Effective, Clean, and Renewable Lovat Gas Solutions is proud to be at the forefront of delivering cutting-edge mobile energy solutions to a wide range of industries, including utilities, mining, oil & gas, and other industrial sectors. Our goal is simple: to provide cost-effective, clean alternative, and renewable energy solutions that meet the diverse needs of our clients. Why choose Lovat Gas Solutions for your mobile energy needs? 1. Cost-Effective Solutions: We understand the importance of cost efficiency for our clients. Our team of experts is dedicated to designing and implementing mobile energy solutions that optimize your energy consumption, reduce expenses, and enhance operational efficiency. We work closely with you to develop strategies that deliver significant cost savings without compromising on performance or reliability. 2. Clean Alternative Energy: Embracing the shift towards cleaner energy sources, Lovat Gas Solutions offers a range of clean alternative energy solutions. Whether it's through the utilization of natural gas, renewable natural gas (RNG), hydrogen, or other sustainable energy options, we help you reduce your carbon footprint and contribute to a greener future. 3. Renewable Energy Expertise: As renewable energy continues to gain momentum, our team stays at the forefront of developments and innovations in the industry. We possess the expertise and experience to integrate renewable energy sources into your mobile energy solutions, harnessing the power of solar, wind, bioenergy, and more. 4. Industry Focus: With a deep understanding of the specific needs and challenges faced by utilities, mining companies, oil & gas operators, and industrial end-users, we tailor our mobile energy solutions to suit your industry requirements. We have a proven track record of delivering exceptional results across these sectors, ensuring that our solutions are aligned with your unique operational demands. Partner with Lovat Gas Solutions to access cost-effective, clean alternative, and renewable energy solutions. We are committed to providing you with the most advanced mobile energy technologies and strategies that deliver tangible benefits to your business. Contact us today to discuss your specific mobile energy needs and let our experienced team design a customized solution that propels your operations forward. Together, let's lead the way in mobile energy solutions and drive success for your business with Lovat Gas Solutions. View Details

Dump Bailer

Revolutionize Cementing and Acidizing Operations with HOCA Oil Tools' Dump Bailers In the dynamic and challenging environment of downhole operations, the need for precise, efficient, and reliable tools has never been greater. HOCA Oil Tools, a pioneer in downhole slick line technology, is at the forefront of this demand with its state-of-the-art Dump Bailers. Specifically designed for targeted applications such as cementing and acidizing, these tools play a pivotal role in enhancing well integrity and performance. HOCA Dump Bailers: Precision in Every Drop Our Dump Bailers are engineered to deliver materials like cement, acids, or other substances directly to the required downhole location with utmost precision. Constructed from durable materials resistant to harsh chemicals and high pressures, HOCA's Dump Bailers ensure that even the most demanding downhole conditions can be tackled with confidence and control. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and demands of modern oil and gas extraction. Our Dump Bailers are designed with this understanding at their core, providing innovative solutions that address the specific needs of downhole operations. By integrating our tools into your operations, you gain access to a level of precision, efficiency, and reliability that sets new industry standards. Invest in HOCA's Dump Bailers to leverage their benefits in your downhole operations. Whether you are executing precise cement plugs, combating downhole leaks, or enhancing production through acidization, our tools provide the solutions you need to achieve optimal results. Discover the difference that HOCA Oil Tools can make in your downhole operations. With our commitment to quality, innovation, and customer service, we provide not just tools, but comprehensive downhole solutions that drive your success. Join the ranks of satisfied clients who have experienced the transformative impact of HOCA’s Dump Bailers in their operations. Choose HOCA Oil Tools for unparalleled downhole solutions that elevate your operational efficiency, safety, and success. View Details

ROV Console and Monitor Racks

Custom ROV Console and Monitor Racks: Unleashing the Power of Personalization in Subsea Operations We understand that no two subsea missions are alike. Each expedition presents unique challenges and requires specific tools to achieve success. That's why we are proud to introduce our state-of-the-art Custom ROV Console and Monitor Racks, designed to cater to your specific ROV missions like never before. Your Mission, Your Configuration Gone are the days of adapting generic consoles to your unique needs. With the Custom ROV Console and Monitor Racks, you have the power to create a setup tailored precisely to your mission requirements. Our team of experts collaborates closely with you to understand the intricacies of your underwater objectives. Whether you need additional video inputs, specialized controls, or specific telemetry interfaces, we've got you covered. Unmatched Flexibility and Versatility Designed for seamless integration, our Custom ROV Consoles and Monitor Racks offer unparalleled flexibility and versatility. Whether you're exploring the depths of the ocean, conducting pipeline inspections, or conducting scientific research, our customized solutions ensure your ROV is equipped to handle any challenge. Enhanced Efficiency and Productivity Efficiency is the cornerstone of successful subsea operations. With a bespoke ROV console, you can optimize your workflow, reducing operational downtime, and maximizing productivity. Customized monitor racks allow you to monitor crucial data and video feeds effortlessly, providing you with real-time insights for quick decision-making. Uncompromising Quality and Reliability When it comes to subsea missions, there's no room for compromises. Our custom ROV consoles and monitor racks are crafted with the highest quality materials and cutting-edge manufacturing techniques, ensuring longevity and reliability in every venture. The Advantage • Expert Consultation: Our team of skilled professionals works with you to understand your unique mission requirements, ensuring a tailored solution that aligns perfectly with your goals. • Innovative Design: With a focus on innovation, our custom ROV consoles are equipped with the latest technology, empowering you with the tools you need for successful subsea exploration. • Rigorous Testing: Before delivery, every custom ROV console and monitor rack undergoes rigorous testing and quality checks, guaranteeing flawless performance in the field. • Exceptional Support: we are committed to providing unparalleled customer support throughout your journey. Our team is always ready to assist you with any questions or technical support you may need. Unlock the Full Potential of Your ROV Missions Don't settle for off-the-shelf solutions that don't meet your exact requirements. With the Custom ROV Console and Monitor Racks, you have the power to shape your subsea destiny. Let us help you design the perfect setup to conquer the depths and revolutionize your ROV missions. Contact us today to explore the limitless possibilities of personalized subsea exploration! View Details

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

HDI 2000B Pressure Gauge System

The HDI 2000B Pressure Gauge System is a panel-mounted electronic device designed to measure and display high-pressure levels accurately in industrial and oilfield settings. It monitors pressures up to 20,000 psi with an accuracy of plus or minus 0.50 percent of full scale, making it suitable for critical applications where precise pressure monitoring is essential for safety and operational control.

The system consists of two main components: a digital gauge display and a remote pressure sensor connected by an interconnect cable. This design allows the sensor to be installed directly at the pressure source, such as a wellhead, pump, or manifold, while the display is mounted in a more accessible location for easy reading and monitoring.

The gauge features a six-inch liquid crystal display that combines a five-digit numeric readout with an analog bar graph composed of 101 segments. This clear and detailed display makes it easy to quickly understand both the exact pressure value and its trend, even in low-light or harsh environments. The display can be read from up to 35 feet away.

Power is supplied by a replaceable 3.6-volt battery designed to last between 12 and 18 months under continuous operation. Calibration and configuration data are stored in memory that does not require power, ensuring settings remain intact even when the battery is replaced or the system is powered off.

The pressure sensor employs strain gauge technology and is compatible with a wide range of connection types including standard pipe threads and flanges. This allows the system to be used across various equipment and pressure ranges, while simplifying maintenance by enabling cross-compatibility of sensors.

Optional analog outputs provide 4–20 mA or 0–1 volt signals to connect the gauge to control systems, data loggers, or remote displays. This supports centralized monitoring and integration with automated process control.

In oil and gas operations, the 2000B system is commonly used to monitor pressure at wellheads to ensure safe extraction pressures, on pumps to maintain correct fluid flow and prevent overpressure damage, and on manifolds to track pressure differentials between flow lines. Accurate, real-time pressure data from this system helps operators detect anomalies early, avoid equipment failure, and optimize production rates while maintaining safe operating conditions. Its robust design and modular installation make it well-suited for harsh field environments where reliability and ease of maintenance are critical.

View Details

ROV Transport Case

Secure Your ROV with the Rugged Transport Case When it comes to transporting your valuable subsea equipment, no compromises should be made. We understand the importance of safeguarding your investment during transit, which is why we are proud to introduce our ROV Transport Case – the ultimate solution for secure and worry-free ROV transportation. Built for the Toughest Challenges Whether you are deploying your ROV for offshore inspections, scientific research, or search and rescue missions, our ROV Transport Case is engineered to withstand the toughest challenges. Crafted from durable and rugged materials, this case ensures your ROV remains well-protected, even in the most demanding and unpredictable environments. Custom-Cut Foam for Precision Protection We know that every ROV is unique, and that's why our ROV Transport Case is designed with customizable precision. The case is filled with closed-cell custom-cut foam, meticulously shaped to fit your specific ROV model. This snug and secure fit prevents any shifting or potential damage during transit, providing unmatched protection for your subsea equipment. Safety First, Always Safety is at the forefront of everything we do. Our ROV Transport Case is no exception. With reinforced corners and edges, impact-resistant features, and secure locking mechanisms, this case ensures your ROV remains securely stored and protected throughout its journey, minimizing any potential risks during transport. Portability and Ease of Use Transporting your ROV shouldn't be a cumbersome task. Our ROV Transport Case is designed with portability and ease of use in mind. The case features rugged handles and ergonomic design, making it effortless to carry and move around, even in challenging terrains. With our case, you can focus on your mission, knowing your ROV is safely stored and ready for action when you reach your destination. Years of Experience With years of experience in subsea robotics and ROV technology. Our commitment to quality and innovation drives us to deliver products that exceed expectations. The ROV Transport Case is a testament to this dedication, providing our customers with a reliable and durable solution for transporting their valuable subsea equipment. Secure Your ROV Today Safeguard your investment and ensure worry-free transit with our ROV Transport Case. Contact us today to learn more about this product and other cutting-edge solutions for your subsea missions. Embrace the power of protection. View Details

Newton Grabber ROV Manipulator

Unleash the Power of Precision: The Newton Grabber We're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need The priority is simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Quality As pioneers in subsea robotics, we consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration. View Details

Ambient Valve 3 1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Needle Valves Angle Pattern Series – Male x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Angle Pattern Needle Valves Male x Female are designed to control the flow of liquids or gases in a piping system. The angle pattern allows the flow to change direction by 90 degrees, reducing piping complexity and minimizing pressure drop.

The male x female configuration enables easy connection to different pipe types and sizes, providing flexibility for installation in various system layouts. These valves are suitable for high-pressure applications, ensuring reliable and leak-free operation.

In oil and gas operations, they are used for controlling flow to instruments, transmitters, or equipment where space is limited and accurate flow control is needed. Metal-to-metal seals and durable stems ensure long-term performance under demanding conditions.

View Details

5 Valve Manifolds Valve Manifold T Type – Pipe to Flange – 6000 PSI

5 Valve Manifold T Type with pipe to flange connection rated 6,000 PSI.

Standard Information for Valve Manifold:

The 5 Valve Manifold T Type, Pipe to Flange is engineered to connect impulse lines to differential pressure transmitters in industrial and oil and gas applications. It features 1/2” Female NPT Pipe to Flange connections set at 54mm (2-1/8”) centers, with a configuration consisting of two block valves, two equalizer valves, and one bleed valve. This design allows for efficient isolation, calibration, and maintenance of transmitters while maintaining process integrity.

The T Type configuration is especially useful because it provides a compact and organized valve layout that simplifies operations like bleeding and equalizing, reducing the risk of leaks and measurement errors. Using a 5 valve manifold ensures maximum operational flexibility, allowing operators to isolate the instrument, balance pressure, and vent safely without interrupting the main process.

Pipe to Flange connections are chosen when connecting transmitters or instruments to existing flanged piping systems, offering strong mechanical support and compatibility with industry-standard flanges. This combination of T Type, 5 valves, and pipe-to-flange connections ensures accurate, reliable, and safe pressure measurement and calibration in critical oil and gas operations.

View Details

Lead Impression Block

MLE Clamp for ESP's

LM2500 Gas Turbine

The LM2500 Gas Turbine is a high-efficiency power unit designed for use in industrial, marine, and utility applications. It’s commonly used for grid support, combined heat and power, and in mobile or remote power installations.

The turbine uses a single-rotor gas generator that can be connected to a power turbine. Inside, it includes a 16-stage compressor, an annular combustor, and a two-stage high-pressure turbine—to deliver strong performance in demanding environments.

Built for flexibility, the LM2500 is well-suited for operations that require frequent start-and-stop cycles. It can ramp up from a cold shutdown to full power in under five minutes, making it a reliable option for fast, on-demand power delivery.

Adding to its versatility, the LM2500 supports a wide range of fuels—including natural gas, diesel, aviation fuel, naphtha, LPG, ethane, ethanol, biodiesel, and more. This fuel flexibility makes it easy to integrate into different operating environments.

Its proven adaptability and performance have made the LM2500 the most widely used gas turbine in the 25–37 megawatt range.

In addition to high efficiency and reliability, the LM2500 delivers low emissions—even in challenging environments or when water availability is limited. With control system redundancy and several configuration options, it offers a customizable solution for dependable, efficient power generation.

View Details

7" HP-6 Hydraulic Set High Angle Production Packer for 32-35 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

A-3 LOK SET Packer

The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer. View Details

Electric Submersible Pump Straight Pull 4.5" Packer

The Ballycatter Model WC-ESP Straight Pull 4.5” Packer is a compact, hydraulic-set production packer optimized for ESP completions in 4.5” casing. It features a pass-through section for ESP power cables, allowing seamless electrical connectivity between the surface and the ESP unit below.

The single-mandrel design with Acner Array Packing Element ensures superior sealing integrity, even in high-pressure and high-temperature wells. Its bi-directional slip system resists pressure from both above and below, providing secure anchoring and preventing unwanted movement.

Setting is achieved hydraulically by applying tubing pressure, locking the packer in place for long-term well isolation. Retrieval is simplified through a straight pull mechanism, eliminating the need for complex downhole tools and ensuring fast, efficient removal in standard and deviated wells. Compatible with all major ESP cable pack-off and feed-thru devices, the WC-ESP Straight Pull 4.5” Packer delivers reliability and ease of operation in compact wellbore conditions.

View Details